Caution:
The air supply must be free of moisture. The water supply must be filtered.
Installation of Scaler Tip and Operation:
1. Holding the tip-end, turn clockwise and fasten securely tighten with wrench.
2. Shout off the water supply. Adjust air pressure to 2.8kg/c
3. Adjust the water flow until a fine mist ejects from the tip.
Lubrication:
Supply 2 -3 drips into the drive air tube once or twice a day or spray lubricant into inlet hole of handpiece for about two seconds.
Technical Parameter:
1.Available Air Pressure: 2~3.5kg/c
2.Air Volume: 15~24L/Min
3.Air Pressure: 2.8kg/c
4.Sound Level: 65-68dB
Packing List:
1* 4-hole /2 -hole Handpiece
1* S1 Tip
1* S2 Tip
1* S3 Tip
1* Tip Wrench
Air Voltage:2.2Mpa~2.5Mpa
Frequency:6000Hz
It is quick couping & standard couping iSO B2/M4 ,easy for maintenance in daily life.
The best frequency.slide-proof,cofortable to hold and easy to clean.
No vibration while running,offering a steady operation.
Suitable for disnfection of high-temperature steam at 135.C conform to modem clinical equirement.
It is comfortable for both patients and operators .
Advanced type,economical design,easy and convenient to operate
